Order Products : sales@su-jiao.com
EnCom PC-PBT 1013 IM
| Category: | PC+PBT , Polycarbonate + PBT |
| Manufacturer: | EnCom, Inc. |
| Trademark: | EnCom |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kEbChq_EnCom-PC-PBT-1013-IM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Impact Modified Molding Grade PC/PBT Alloy |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 10 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 0.60 to 1.1 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 51.7 | MPa | ASTM D638 |
| Flexural Modulus | 1710 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 82.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -- | 270 | J/m | |
| 23°C | 880 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 115 | °C | |
| 1.8 MPa, Unannealed | 98.9 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 to 121 | °C | |
| Drying Time | 2.0 to 6.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 243 to 271 | °C | |
| Middle Temperature | 249 to 277 | °C | |
| Front Temperature | 257 to 282 | °C | |
| Nozzle Temperature | 254 to 274 | °C | |
| Processing (Melt) Temp | 260 to 279 | °C | |
| Mold Temperature | 65.6 to 93.3 | °C | |
| Back Pressure | 0.345 to 0.689 | MPa | |
| Screw Speed | 40 to 75 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 600 TFE 10 | RTP Company | ABS | RTP |
| SAMAT 5003A | POLYROCKS CHEMICAL CO., LTD | PP, Unspecified | SAMAT |
| Shin-Etsu Elastomer FE-221U | Shin-Etsu Silicones of America | Fluoro Si | Shin-Etsu Elastomer |
| DuraSurf™ E801 | Crown Plastics | HDPE, HMW | DuraSurf™ |
| POCAN® ECO T 3215 000000 | LANXESS GmbH | PBT+PET | POCAN® |
