Order Products : sales@su-jiao.com
Promyde® B30 P2 G20 U0
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | NUREL, S.A. |
| Trademark: | Promyde® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kEOmWG_Promyde-B30-P2-G20-U0.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Promyde B30 P2 G20 U0. Injection Moulding Polyamide 6 with 20% glass fibre, and flame retardant using a halogen and red phosphorous free flame retardant system. CHARACTERISTICS Promyde B30 P2 G20 U0 is a polyamide 6 with 20% glass fibre with high mechanical strength, heat stabilized, lubricated and nucleated for injection moulding. Its halogen free flame retardant system enhances its flame behavior to V0- UL rated category. APPLICATIONS Promyde B30 P2 G20 U0 allows a fast and efficient mould filling, and an easy mould release, that combined with its excellent mechanical properties, and its flame retardant properties make it suitable for components specially used in electrical and electronics industries. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density (23°C) | 1.36 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ||||
| Vertical flow direction | 0.40 - 0.45 | -- | % | |
| Flow direction | 0.30 - 0.35 | -- | % | |
| Water Absorption | ISO 62 | |||
| Saturated, 23°C | 6.9 | -- | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 2.3 | -- | % | ISO 62 |
| Viscosity Number 1(H2SO4 (Sulphuric Acid)) | 125 | -- | cm³/g | ISO 960 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 8300 | 5000 | MPa | ISO 527-2/1 |
| Tensile Stress (23°C) | 95.0 | 40.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break, 23°C) | 2.5 | 5.0 | % | ISO 527-2/50 |
| Flexural Modulus 2(23°C) | 7200 | 3500 | MPa | ISO 178 |
| Flexural Stress 3(23°C) | 180 | 90.0 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 6.5 | 25 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 60 | 80 | kJ/m² | ISO 179/1eU |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 200 | -- | °C | ISO 75-2/A |
| Melting Temperature (DSC) 4 | 222 | -- | °C | ISO 3146 |
| Linear thermal expansion coefficient | ISO 11359-2 | |||
| Flow : 23 to 80°C | 2.0E-5 | -- | cm/cm/°C | ISO 11359-2 |
| Lateral : 23 to 80°C | 6.0E-5 | -- | cm/cm/°C | ISO 11359-2 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+13 | 1.0E+10 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+12 | ohms·cm | IEC 60093 |
| Dielectric Constant (1 MHz) | 3.70 | 6.80 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.023 | 0.22 | IEC 60250 | |
| Comparative Tracking Index | 600 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (1.50 mm) | V-0 | -- | UL 94 | |
| Glow Wire Flammability Index (1.50 mm) | 960 | -- | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature (1.50 mm) | 775 | -- | °C | IEC 60695-2-13 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | < 80.0 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Processing (Melt) Temp | 250 - 270 | °C | |
| Mold Temperature | 40.0 - 80.0 | °C | |
| Injection Rate | Moderate-Fast |
| Injection instructions |
|---|
| Back pressure: moderate |
| Note Message | |
|---|---|
| 1 . | 0,005 g/ml H2SO4 |
| 2 . | 2.0 mm/min |
| 3 . | 2.0 mm/min |
| 4 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ad-Tech Epoxy EL-327 | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| Lucon® PO6062 | LG Chem Ltd. | PPE+PS | Lucon® |
| Plenco 03356 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
| PermaStat PLUS® 4500 | RTP Company | PK | PermaStat PLUS® |
| Durethan® DP 2801 000000 | LANXESS Corporation | Nylon 66 | Durethan® |
