Order Products : sales@su-jiao.com
KRATON® D1160 E
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kEDp4I_KRATON-D1160-E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1160 E is a clear linear triblock copolymer based on styrene and isoprene with bound styrene of 18.5% mass. It is supplied from Europe in the physical form identified below.
Kraton D1160 E is used in formulating adhesives, in particular hot melt pressure sensitive adhesives. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ISO 2781 |
| Apparent Density | 0.35 | g/cm³ | ASTM D1895B |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 9.0 | g/10 min | ISO 1133 |
| Bound Styrene | 17.4 to 20.5 | % | Internal Method |
| Antioxidant Additive 1 | > 0.1 | wt% | Internal Method |
| Ash Content - S | 0.1 to 0.4 | wt% | ISO 247-B |
| Molecular Weight | 168000 to 188000 | g/mol | Internal Method |
| Solution Viscosity 2(25°C) | 1.0 | Pa·s | Internal Method |
| Total Extractables | < 1.0 | wt% | Internal Method |
| Volatile Matter | < 0.30 | wt% | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 30 sec, Compression Molded) | 48 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 1.90 | MPa | ISO 37 |
| Tensile Stress (Yield) | 32.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 1300 | % | ISO 37 |
| Note Message | |
|---|---|
| 1 . | Primary phenolic antioxidant |
| 2 . | Measured on 25% mass solution in toluene using a Brookfield viscometer, LTF or LTV model. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stanyl® TC502 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| Diakon® TD1042 | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| Durez® 31735 (Compression) | Sumitomo Bakelite North America, Inc. | Phenolic | Durez® |
| INEOS LLDPE LL3910AA | INEOS Olefins & Polymers Europe | LLDPE | INEOS LLDPE |
| PELPRENE™ P70B | TOYOBO America, Inc. | TPEE | PELPRENE™ |
