Order Products : sales@su-jiao.com
ASI POLYETHYLENE CP 775-01
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | ASI POLYETHYLENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kD2sAb_ASI-POLYETHYLENE-CP-775-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CP 775-01 is a molding grade, low-density polyethylene. This material meets the FDA Regulation 177.1520 for food contact applications. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.917 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 10.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 200 | % | ASTM D638 |
| Apparent Bending Modulus | 117 | MPa | ASTM D747 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 92.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PC GN1007FT | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| BLUESTAR® PBT 403M-G20 | Nantong Zhonglan Engineering Plastics Co., Ltd. | PBT | BLUESTAR® |
| CALP VA001 | Lion Idemitsu Composites Co., Ltd. | LLDPE | CALP |
| Complet® LCF30-LGF20-PA66 | PlastiComp, Inc. | Nylon 66 | Complet® |
| Infino MKD-1016 | SAMSUNG SDI CO., LTD. | Nylon, Unspecified | Infino |
