BJB Polyurethane SC-92

Category:	TSU , Polyurethane Thermoset Elastomer
Manufacturer:	BJB Enterprises, Inc.
Trademark:	BJB Polyurethane
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	kCbhAY_BJB-Polyurethane-SC-92.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
SC-92 is a water-based, aliphatic polyurethane coating designed to provide a final finish or paintable surface for various flexible polyurethane foams, elastomers, and latex products. It can also be used as an in-mold coating for casting or brushing polyurethane products behind. Product Highlights: Provides a uniform semi-gloss finish Clear base is easy to tint or pigment Excellent color retention High elongation and tear resistance

General Information
Features	Gloss, Medium Sprayable Good tear strength Good color stability Good coloring Extended tensile rate aliphatic
Uses	Coating application
Appearance	Clear/transparent
Processing Method	Coating

Physical	Nominal Value	Unit
Specific Gravity	1.03	g/cm³
VOC Content	10.0	kg/m³
Solids Content	45	%
Viscosity (25°C)	125	mPa·s

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress
100% strain	3.31	MPa
200% strain	4.69	MPa
300% strain	6.14	MPa
Tensile Strength (Yield)	27.6	MPa	ASTM D412
Tensile Elongation (Break)	750	%	ASTM D412

Thermoset	Nominal Value	Unit
Shelf Life	52	wk

Additional Information
The recommended method of applying SC-92 is by spraying with conventional spray gun. Brush coats may be used but spraying is more uniform. The recommended spray pressures with a conventional spray gun will normally range between 15 to 25 psi. When pigmented with BJB's 7100 Series water based pigments, 2 to 3 coats should be applied to achieve an opaque film. Surfaces should be clean and dry. A liquid dish soap and water solution is an effective surface cleaner. A primer like BJB's TC-89 will greatly increase adhesion to surface.

Additional Information

The recommended method of applying SC-92 is by spraying with conventional spray gun. Brush coats may be used but spraying is more uniform. The recommended spray pressures with a conventional spray gun will normally range between 15 to 25 psi. When pigmented with BJB's 7100 Series water based pigments, 2 to 3 coats should be applied to achieve an opaque film. Surfaces should be clean and dry. A liquid dish soap and water solution is an effective surface cleaner. A primer like BJB's TC-89 will greatly increase adhesion to surface.

Resin Grade	Manufacturer	Category	Trademark
TRIREX® Compound 3025G15	Samyang Corporation	PC	TRIREX® Compound
Celanex® 5202	Celanese Corporation	PBT	Celanex®
Chiao Fu PA66 MD212STG18 NAT	Chiao Fu Enterprises Co., Ltd.	Nylon 66	Chiao Fu PA66
Dryflex® 600600S	ELASTO	SEBS	Dryflex®
PLUSTEK PA507	Polyram Ram-On Industries	Nylon 66	PLUSTEK