Order Products : sales@su-jiao.com
K-vinyl KK TC-A-98
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | Technovinyl Polymers India Ltd. |
| Trademark: | K-vinyl |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kBsIuM_K-vinyl-KK-TC-A-98.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
K-vinyl KK TC-A-98 is a Polyvinyl Chloride material. It is available in Africa & Middle East for extrusion. Important attributes of K-vinyl KK TC-A-98 are:
Typical application of K-vinyl KK TC-A-98: Wire & Cable |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.35 to 1.41 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 95 to 101 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 22.8 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 200 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 168 hr) | 25 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (100°C, 168 hr) | 25 | % | ASTM D573 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Thermal Stability (200°C) | 2 | hr |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Loss of Mass | 20.0 | g/m² | |
| Volatile Loss - 3 hrs (130°C) | < 0.50 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 8.0E+14 | ohms·cm | ASTM D257 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 150 to 185 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenac™ LM511 | Asahi Kasei Chemicals Corporation | Acetal (POM) Homopolymer | Tenac™ |
| DISTRUMID 6 GF30 HI | Distrupol | Nylon 6 | DISTRUMID |
| Elastollan® 688A10N Film | BASF Corp. Thermoplastic Polyurethanes | TPU-Polyester | Elastollan® |
| Kingfa MAC-301 | Kingfa | PC+ABS | Kingfa |
| Jam PE 18YF3 | Jam Petrochemical Company | LLDPE | Jam PE |
