Order Products : sales@su-jiao.com
Bapolan® PS6130
| Category: | PS (GPPS) , General Purpose Polystyrene |
| Manufacturer: | Bamberger Polymers, Inc. |
| Trademark: | Bapolan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | k8oHXg_Bapolan-PS6130.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Heat resistant with high tensile strength providing excellent gloss, toughness, melt strength, and high heat resistance. Moderate flow and a good balance of strength and set up. This resin meets FDA requirements. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.04 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 3.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 47.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.0 | % | ASTM D638 |
| Flexural Modulus | 3000 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 105 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRE-ELEC® PE 1201 | Premix Oy | HDPE | PRE-ELEC® |
| Moplen EP1006 | LyondellBasell Industries | PP Impact Copolymer | Moplen |
| VESTAMID® L L1670 | Evonik Industries AG | Nylon 12 | VESTAMID® L |
| Next Nylon 6 Prime Series NGM40-01BK | Next Polymers Ltd. | Nylon 6 | Next Nylon 6 Prime Series |
| Evoprene™ 3268 | AlphaGary | SBS | Evoprene™ |
