Order Products : sales@su-jiao.com

3M™ Dyneon™ PTFE TF 1702

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ PTFE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	k8dK96_3MDyneonPTFETF1702.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Non-free-flowing suspension PTFE compression moulding powder developed especially for thin skived film applications.

Special Features

Meets ASTM D 4894 Type II classification

Produced by suspension polymerisation

Very fine particle size

Low moulding pressure

Dense polymer structure

Lower deformation under load

Increased gel stability

Improved weldability

Good electrical and mechanical properties

Lower permeation rate compared to TF 1750

Excellent chemical inertness

Low friction behaviour

Good flame retardance

Exceptional temperature resistance

General Information
Features	Low friction coefficient Weldable Good electrical performance Flame retardancy
Uses	Films Washer Sheet
Forms	Powder
Processing Method	Compression molding

Physical	Nominal Value	Unit	Test Method
Density	2.16	g/cm³	ISO 12086
Apparent Density	0.41	g/cm³	ISO 60
Molding Shrinkage	5.2	%	Internal method
Average Particle Size	27	µm	ISO 13320

Films	Nominal Value	Unit	Test Method
Tensile Strength (100 µm)	42.0	MPa	ISO 527-3
Tensile Elongation (Break, 100 µm)	590	%	ISO 527-3

Electrical	Nominal Value	Unit	Test Method
Dielectric Strength (0.100 mm)	90	kV/mm	ISO 12086

Resin Grade	Manufacturer	Category	Trademark
PrimaFlex® CP 3502	Plastic Solutions, Inc.	PP Impact Copolymer	PrimaFlex®
SLOVAMID® 66 GF 25 FRI 3	Plastcom	Nylon 66	SLOVAMID® 66
NYLOY® UB-0010N G50N2N	Nytex Composites Co., Ltd.	Nylon, Unspecified	NYLOY®
LinGen FR298	Shanghai Lin Gen Rubber Materials Co., Ltd.	TPE	LinGen
Sylvin 2995-66D Clear Blue 8479	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin