Order Products : sales@su-jiao.com
Lastil G/30
| Category: | SAN , Styrene Acrylonitrile |
| Manufacturer: | LATI S.p.A. |
| Trademark: | Lastil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | k83rnV_Lastil-G-30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Compound based on Styrene-Acrylonitrile copolymer (SAN). Glass fibres. High dimensional stability. High stiffness. Low coefficient of linear thermal expansion. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.31 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | ISO 294-4 | ||
| Across Flow : 2.00 mm | 0.25 to 0.45 | % | |
| Flow : 2.00 mm | 0.15 to 0.30 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ISO 527-2/1 | ||
| 23°C | 9600 | MPa | |
| 60°C | 8000 | MPa | |
| 90°C | 6000 | MPa | |
| Tensile Stress | ISO 527-2/5 | ||
| Yield, 90°C | 35.0 | MPa | |
| Break, 23°C | 80.0 | MPa | |
| Break, 60°C | 60.0 | MPa | |
| Break, 90°C | 25.0 | MPa | |
| Tensile Strain | ISO 527-2/5 | ||
| Yield, 90°C | 1.2 | % | |
| Break, 23°C | 2.0 | % | |
| Break, 60°C | 2.0 | % | |
| Break, 90°C | 2.5 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C | 3.0 | kJ/m² | |
| 23°C | 2.5 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -20°C | 10 | kJ/m² | |
| 23°C | 12 | kJ/m² | |
| Notched Izod Impact (23°C, 3.20 mm) | 35 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 110 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 100 | °C | ISO 75-2/A |
| Continuous Use Temperature 2 | 95.0 | °C | |
| Vicat Softening Temperature | 110 | °C | ISO 306/B50 |
| CLTE - Flow (30 to 100°C) | 1.5E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Comparative Tracking Index 3(Solution A) | 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 22 | % | ASTM D2863 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 to 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 220 to 260 | °C | |
| Mold Temperature | 50.0 to 70.0 | °C | |
| Injection Rate | Moderate-Fast |
| Note Message | |
|---|---|
| 1 . | at 60 Mpa of cavity pressure |
| 2 . | 20,000 hr |
| 3 . | Without Surfactant |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| New-prene™ 6175B | Total Polymer Vision (Suzhou) Co., LTD | PP+EPDM | New-prene™ |
| Allen ABS Luran® 797/LXS | SEKISUI Polymer Innovations, LLC | ABS | Allen ABS |
| Arylmax® K7522CF30 | Polymics, Ltd. | PAEK | Arylmax® |
| KANEKA H305 | Kaneka North America LLC | CPVC | KANEKA |
| Lupoy® HP5004A | LG Chem Ltd. | PC+ABS | Lupoy® |
