Order Products : sales@su-jiao.com
Braskem PE HD7600U
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | k3f5NG_BraskemPEHD7600U.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HD7600U is a High Density Polyethylene (HDPE), copolymer, developed for use in LLDPE and LDPE blends, special for shrink films. This product has gels control and optimized additive for this application. Application: LLDPE and LDPE blends for shrink films. Process: Blow films. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.954 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.30 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 50°C, 2.00mm, 10% Igepal, molded, F50 | 100 | hr | ASTM D1693 |
| 50°C, 2.00mm, 100% Igepal, molded, F50 | 200 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 64 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, molding | 30.0 | MPa | ASTM D638 |
| Fracture, molding | 33.0 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 1140 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (Compression Molded) | 100 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 66.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 128 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Adell PP EQ-14 | Adell Plastics, Inc. | PP Homopolymer | Adell PP |
| Cevian®-V SERG3 | Daicel Polymer Ltd. | ABS | Cevian®-V |
| Elastron® G G100.A80.N.E | Elastron USA, Inc. | SEBS | Elastron® G |
| Hostaform® XGC10 | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| INSTRUC PEEKGF30HF | Infinity LTL Engineered Compounds | PEEK | INSTRUC |
