Order Products : sales@su-jiao.com
Generic PB
| Category: | PB , Polybutylene |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | k22U1Z_Generic-PB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PB This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.905 - 0.925 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.40 - 5.4 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, 23°C) | 29.9 - 35.1 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 300 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 442 - 450 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) | 96.3 - 128 | °C | ISO 3146 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 189 - 212 | °C |
| Extrusion instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PBThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1401 N | RTP Company | PESU | RTP |
| TEDUR® L 9310-4 S | ALBIS PLASTIC GmbH | PPS | TEDUR® |
| CYCOM® 759 | Cytec Industries Inc. | Epoxy | CYCOM® |
| Optema鈩?TC 110 Cast | ExxonMobil Chemical | EMA | Optema™ |
| Celstran® PP-GF50-04 Black | Celanese Corporation | PP, Unspecified | Celstran® |
