Order Products : sales@su-jiao.com
Torlon® 4645
| Category: | PAI , Polyamide-imide |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Torlon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iyH4Da_Torlon-4645.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Torlon 4645 is an injection moldable wear-resistant polyamide-imide (PAI) resin that mainly provides excellent wear resistance for lubricating wear products. At 275 ℃( 525 °F), Torlon PAI has more strength and rigidity than all thermoplastics, and has excellent wear resistance, creep resistance and chemicals. Potential applications of Torlon 4645 polyamide-imide include thrust washers, seals, sliding vanes, spools, bushings, clutch rollers, and pistons. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.57 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.25 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 18600 | MPa | ASTM D638 |
| Tensile Strength | 114 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 0.80 | % | ASTM D638 |
| Flexural Modulus | 12400 | MPa | ASTM D790 |
| Flexural Strength | 154 | MPa | ASTM D790 |
| Compressive Strength | 157 | MPa | ASTM D695 |
| Shear Strength | ASTM D732 | ||
| 23°C | 85.5 | MPa | ASTM D732 |
| 150°C | 60.7 | MPa | ASTM D732 |
| Coefficient of Friction | ASTM D1894 | ||
| -- 1 | 0.070 | ASTM D1894 | |
| -- 2 | 0.090 | ASTM D1894 | |
| Wear Factor | ASTM D3702 | ||
| Lubrication: 4 m/s, 5.2 MPa (800 fpm, 750 psi) | 0.300 | in³·min^-10/ft·lb·hr | ASTM D3702 |
| Lubrication: 0.375 m/s, 6.9 MPa (75 fpm, 1000 psi) | 1.60 | in³·min^-10/ft·lb·hr | ASTM D3702 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Linear Thermal Expansion | 1.4E-5 | cm/cm/°C | ASTM D696 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 37 | J/m | ASTM D256 |
| Unnotched Izod Impact | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 281 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 177 | °C | |
| Drying Time | 3.0 | hr | |
| Suggested Max Moisture | 0.050 | % | |
| Rear Temperature | 304 | °C | |
| Nozzle Temperature | 371 | °C | |
| Mold Temperature | 199 - 216 | °C | |
| Back Pressure | 6.89 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Screw L/D Ratio | 18.0:1.0 - 24.0:1.0 |
| Injection instructions |
|---|
| 最低干燥要求：350 °F (177°C)温度下3小时， 300 °F (149°C) 温度下4小时，或250 °F (121°C) 温度下16小时。 压缩比：1:1~1.5:1 开始时，压力设置成较高的6,000-8,000 psi ，几秒钟后，降至3,000-5,000psi（ 20.69-34.48MPa） ，进行保压。 成型部件需进行后固化。 |
| Note Message | |
|---|---|
| 1 . | Lubrication: 4 m/s, 5.2 MPa (800 fpm, 750 psi) |
| 2 . | Lubrication: 0.25 m/s, 6.9 MPa (75 fpm, 1000 psi) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 600 TFE 15 | RTP Company | ABS | RTP |
| NEXUS Reprocessed PPH 30 RBK G33 | Nexus Resin Group, LLC. | PP Homopolymer | NEXUS Reprocessed |
| MAJORIS G551/20 - 8229 | AD majoris | PP, Unspecified | MAJORIS |
| KMI KM6034 | KMI Group, Inc. | SBC | KMI |
| LEXAN™ SLX2432T resin | SABIC Innovative Plastics | PC | LEXAN™ |
