Order Products : sales@su-jiao.com
TECHLEN M7153Y
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | DAEHA Co., LTD |
| Trademark: | TECHLEN |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iwm31n_TECHLEN-M7153Y.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TECHLEN M7153Y is a Polypropylene material. It is available in Asia Pacific. Primary attribute of TECHLEN M7153Y: High Stiffness. Typical application of TECHLEN M7153Y: Automotive |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.08 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 17 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 18.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 170 | % | ASTM D638 |
| Flexural Modulus | 1670 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact | ASTM D256 | ||
| -10°C | 59 | J/m | |
| 23°C | 420 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 105 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RONFALIN® TRE35 | A. Schulman Europe | ABS | RONFALIN® |
| Andur RT 9002 AP | Anderson Development Company | PUR-TDI | Andur |
| INNOPOL® PP CS 1-3810 | Inno-Comp Ltd. | PP Homopolymer | INNOPOL® PP |
| POLYCASA® XT SBW | Polycasa | Acrylic (PMMA) | POLYCASA® |
| Mediprene® 500502M | ELASTO | SEBS | Mediprene® |
