Order Products : sales@su-jiao.com
Andur 800 AP
| Category: | PUR-Est/eth,TDI , Polyurethane (Polyester/Polyether mix, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ipgpUG_Andur-800-AP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 800-AP is the result of several years of research to develop a high performance, moderate cost prepolymer for the cast urethane industry. This new product is a poly-ester/ether, toluene diisocyanate-terminated prepolymer. An elastomer with a hardness of 80 Shore A is obtained by reaction with Curene 442. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or with plasticizers. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 1800 | cP | ASTM D2393 |
| 100°C | 550 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 3.5 to 3.9%Specific Gravity, ASTM D792, 77°F: 1.17 g/mlSpecific Gravity, ASTM D792, 212°F: 1.13 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen RP5007K | PolyMirae | PP Random Copolymer | Moplen |
| TCA Lite® 850WMD | Continental Structural Plastics | Polyester, TS | TCA Lite® |
| Arlatex® 1495E | INSA | SBR, Emulsion | Arlatex® |
| Hostaform® C 2521 XAP² ™ | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| KOPLA PA6 KNG1030 | KOPLA Co., Ltd. | Nylon 6 | KOPLA PA6 |
