Order Products : sales@su-jiao.com
Spartech Polycom SC1F-4095
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Spartech Polycom |
| Trademark: | Spartech |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iipLMA_Spartech-Polycom-SC1F-4095.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Spartech SC1F-4095 is a medium viscosity, flame retardant, ABS resin for injection molding. It is heat stabilized and lubricated for good processing characteristics, and it exhibits good impact and chemical resistance. With the benefit of low moisture absorption, ABS can be used in a variety of environments. Being a very versatile product, SC1F-4095 can be used for industrial, transportation, sporting goods and electrical/electronic applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 4.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 0.50 | % | ASTM D955 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 110 | J/m | ASTM D256 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.18 mm, NC) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 87.8 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 179 - 204 | °C | |
| Middle Temperature | 193 - 210 | °C | |
| Front Temperature | 204 - 221 | °C | |
| Nozzle Temperature | 193 - 232 | °C | |
| Processing (Melt) Temp | 193 - 232 | °C | |
| Mold Temperature | 43.3 - 65.6 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SAN 140 | Trinseo | SAN | SAN |
| Sylvin 8250-55 Natural | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| ULTEM™ foam XP080 | SABIC Innovative Plastics | PEI | ULTEM™ foam |
| Glastic® 1461 | Glastic Corporation | Polyester, TS | Glastic® |
| LUVOCOM® 1-8642 | LEHVOSS Group | Nylon 66 | LUVOCOM® |
