Order Products : sales@su-jiao.com
Generic PP, Unspecified - Mica
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ig4egc_Generic-PP-Unspecified---Mica.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PP, Unspecified - Mica This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.998 - 1.25 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.0 - 18 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (23°C) | 0.70 - 1.4 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (23°C) | 73 - 75 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 22.1 - 47.6 | MPa | ASTM D638 |
| 23°C | 20.0 - 33.2 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 3.0 - 26 | % | ASTM D638 |
| Flexural Modulus (23°C) | 1640 - 4990 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 31.0 - 49.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 26 - 81 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 39 - 670 | J/m | ASTM D256 |
| Dart Drop Impact (23°C) | 0.339 - 0.613 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 119 - 151 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 55.5 - 88.4 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 73.9 - 79.7 | °C | |
| Drying Time | 1.5 - 2.5 | hr | |
| Suggested Max Moisture | 0.050 - 0.054 | % | |
| Rear Temperature | 195 - 224 | °C | |
| Middle Temperature | 195 - 229 | °C | |
| Front Temperature | 195 - 235 | °C | |
| Nozzle Temperature | 214 - 232 | °C | |
| Processing (Melt) Temp | 200 - 212 | °C | |
| Mold Temperature | 37.8 - 48.9 | °C | |
| Injection Pressure | 6.55 - 86.2 | MPa | |
| Holding Pressure | 5.17 - 6.42 | MPa | |
| Back Pressure | 0.676 - 0.689 | MPa |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PP, Unspecified - MicaThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinpolene MBW1664 | Teknor Apex Asia Pacific PTE. LTD. | PP, Unspecified | Sinpolene |
| Versollan™ RU 2204X | PolyOne Corporation | TPE | Versollan™ |
| Braskem PP C7061-01N | Braskem Europe GmbH | PP Impact Copolymer | Braskem PP |
| Hanwha Total PE 8400F | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | LLDPE | Hanwha Total PE |
| Sylvin 802-94 CLEAR | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
