Order Products : sales@su-jiao.com
Microthene® MN71120
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Microthene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ifXa4z_Microthene-MN71120.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MICROTHENE MN 711-20 is a very high flow, rotational molding powder for general-purpose applications. MN 711-20 can be used to produce a variety of rotomolded objects including toys, containers and liners. MN 711-20 produces parts with smooth inner surfaces and good impact strength. MN 711-20 also provides consistent shrinkage characteristics, good warp resistance and is available as a 35-mesh powder. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.915 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 22 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693A | ||
| 10% Igepal, rotomolding, F50 | < 1.00 | hr | ASTM D1693A |
| 100% Igepal, rotomolding, F50 | 1.00 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.18 mm, Rotational Molded) | 78.6 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant (3.18 mm, Rotational Molded) | 139 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, rotational molding | 40.0 | °C | ASTM D648 |
| 1.8 MPa, unannealed, rotational molding | 23.0 | °C | ASTM D648 |
| Additional Information |
|---|
| Low Temperature Impact, ARM STD, -40°F, 0.125 in, Rotational Molded: 30 ft-lbsLow Temperature Impact, ARM STD, -40°F, 0.25 in, Rotational Molded: 60 ft-lbs |
| Note Message | |
|---|---|
| 1 . | Type 4, 51mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8326-85 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| TOTAL Polystyrene Impact 975E | TOTAL Refining & Chemicals | PS (HIPS) | TOTAL Polystyrene |
| NEOPLAST 173 M/E | Zylog Plastalloys | TPE | NEOPLAST |
| Bayblend® FR3002 | Covestro - Polycarbonates | PC+ABS | Bayblend® |
| Sylvin 9067-90 Orange 533 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
