Order Products : sales@su-jiao.com
KRATON® D1102 J
| Category: | SBC , Styrene Butadiene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ifW3cc_KRATON-D1102-J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1102 J is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Japan in the physical form(s) outlined in the following grade nomenclature
Kraton D1102 J is used as an ingredient in formulating adhesives, sealants, and coatings. It may also find use as a modifier of bitumen and polymers. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 6.0 | g/10 min | ISO 1133 |
| Bound Styrene | 30.0 | % | |
| Ash Content | < 1.0 | % | ISO 247 |
| Solution Viscosity - 25% toluene solution (25°C) | 0.80 to 1.6 | Pa·s | Internal Method |
| Volatile Matter | < 1.0 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 30 sec) | 70 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 2.90 | MPa | ISO 37 |
| Tensile Stress (Yield) | 33.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 880 | % | ISO 37 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRL PCSF-FR-G30 | Polymer Resources Ltd. | PC | PRL |
| Zytel® RS LC2800 NC010 | DuPont Performance Polymers | Nylon, Unspecified | Zytel® RS |
| Desmopan® DP 9370AU | Covestro - PUR | TPU-Polyether | Desmopan® |
| MadeSolid PET+ | MadeSolid, Inc. | PET | MadeSolid |
| LEXAN™ FST9405T resin | SABIC Innovative Plastics | PC | LEXAN™ |
