Order Products : sales@su-jiao.com

KMI PP KM-021BB

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	KMI Group, Inc.
Trademark:	KMI PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ieruu1_KMIPPKM021BB.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

KM-021BB is the block HIPP for sheet and thermoforming applications. KMI impact polypropylene shows an excellent balance between stiffness and impact strength at low temperatures as well as good processability.

Food Contact Application:
KM-021BB meets the FDA requirements in the Code of Federal Regulations in CFR 177.1520 for food contact.

Characteristics:

Excellent balance between stiffness and impact strength

Good appearance and processability

General Information
Features	Block Copolymer Impact copolymer Impact resistance, high Workability, good Compliance of Food Exposure Good appearance
Uses	Thermoforming Applications Sheet
Agency Ratings	FDA 21 CFR 177.1520
Processing Method	Sheet extrusion molding Thermoforming

Physical	Nominal Value	Unit	Test Method
Density	0.910	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	0.80	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	82		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	29.4	MPa	ASTM D638
Tensile Elongation (Break)	500	%	ASTM D638
Flexural Modulus	1270	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Unnotched Izod Impact (23°C)	No Break		ASTM D256

Thermal	Nominal Value	Unit	Test Method
Heat Distortion	110	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
TRAMID® 4210G30	Samyang Corporation	Nylon, Unspecified	TRAMID®
CYCOLOY™ CX2244ME resin	SABIC Innovative Plastics	PC+ABS	CYCOLOY™
ICORENE® 9103 GW1 Natural 0000	ICO Polymers EMEA, A Division of A. Schulman	HDPE	ICORENE®
POCAN® BFN 4211 000000	LANXESS GmbH	PBT	POCAN®
LNP™ FARADEX™ AS003 compound	SABIC Innovative Plastics	ABS	LNP™ FARADEX™