Order Products : sales@su-jiao.com
Adell PBT HD-30
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | Adell Plastics, Inc. |
| Trademark: | Adell PBT |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | idRgmC_Adell-PBT-HD-30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Adell PBT HD-30 is a Polybutylene Terephthalate (PBT) material. It is available in North America. Primary attribute of Adell PBT HD-30: Impact Resistant. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.80 to 1.1 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.10 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | ASTM D785 | ||
| M-Scale | 58 | ||
| R-Scale | 108 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 53.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 90 | % | ASTM D638 |
| Flexural Modulus | 2040 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 75.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C, 3.18 mm | 640 | J/m | |
| 23°C, 3.18 mm | 890 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 110 | °C | |
| 1.8 MPa, Unannealed | 98.9 | °C | |
| Melting Temperature | 240 to 250 | °C | |
| CLTE - Flow | 9.5E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.8E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | 18 | kV/mm | ASTM D149 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRIMALLOY® A1400 | Mitsubishi Chemical Performance Polymers, Inc. | TPE | PRIMALLOY® |
| SLOVAMID® 6 FRC 2 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| SUMILITE® EL-3800F | Sumitomo Bakelite Co., Ltd. | Epoxy | SUMILITE® |
| TAISOX 2214 | Formosa Plastics Corporation | LLDPE | TAISOX |
| Brush-On® 35 | Smooth-On, Inc | PUR, Unspecified | Brush-On® |
