Order Products : sales@su-jiao.com
KRATON® D1161 J
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | id7zfX_KRATON-D1161-J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1161 J Polymer is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied from Japan in the physical form(s) identified in the grade nomenclature below.
Kraton D1161 J Polymer is used in formulating adhesives, sealants and coatings. It is also used as a modifier of bitumen and polymers and in formulating compounds. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.3 to 3.7 | g/10 min | ISO 1133 |
| Bound Styrene | 15.0 | % | |
| Ash Content | ISO 247 | ||
| JS | < 2.5 | % | |
| JSP | < 1.0 | % | |
| JU | < 1.0 | % | |
| Solution Viscosity - Toluene, 25%wt (25°C) | 0.90 to 1.7 | Pa·s | Internal Method |
| Volatile Matter - 2hr (110°C) | < 1.0 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 30 sec) | 37 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 0.900 | MPa | ISO 37 |
| Tensile Stress (Yield) | 28.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 1300 | % | ISO 37 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong PA6 A1LG6301 | Shandong Dongchen Engineering Plastics Co., Ltd. | Nylon 6 | Shandong PA6 |
| Badamid® PA610 GF30 TF15 | Bada AG | Nylon 610 | Badamid® |
| Di-Pak™ E-4056 | Hapco Inc. | TP, Unspecified | Di-Pak™ |
| Five Plus™ HPP30C | Noble Polymers | PP Homopolymer | Five Plus™ |
| ALCOM® PC 740/4.14 RD1171-12LC | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
