Order Products : sales@su-jiao.com
Stirol UPS-0803 E (extra)
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | JSC CONCERN STIROL |
| Trademark: | Stirol |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iW0aYd_Stirol-UPS-0803-E-extra-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| UPS-0803 E is for manufacturing of sheets and details of interior lining for refrigerators, deep-freezers and their component parts. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) 1 | 2.7 to 3.7 | g/10 min | ISO 1133 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | < 0.10 | % | ISO 62 |
| Bound Styrene | < 0.1 | % | |
| Ash Content | > 1.9 | % | |
| Purity 2 | 20.0 | ||
| Rubber Content | 20.0 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strain (Break) | > 40 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | > 8.7 | kJ/m² | ISO 179 |
| Note Message | |
|---|---|
| 1 . | ±10% |
| 2 . | Disc surface should be clean. It is allowed one insertion with diameter 0,2-0,3 mm at the surfaces of disks converting to area, cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mold Star® 30 | Smooth-On, Inc | Silicone | Mold Star® |
| Catalyst PS/2LRO | Solvay Specialty Polymers | Polyolefin, Unspecified | Catalyst |
| G-Lene E45A003 | Gas Authority of India Limited | HDPE | G-Lene |
| Enable™ 20-10 Series | ExxonMobil Chemical | mPE | Enable™ |
| ULTEM™ AUT210 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
