Order Products : sales@su-jiao.com
En Chuan 6012
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | En Chuan Chemical Industries Co,. Ltd. |
| Trademark: | En Chuan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iVM4Ek_En-Chuan-6012.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This is a non-accelerator, non-wax, and non-thixotropy resin. It has the outstanding characteristic of transparency. Therefore it is particularly suitable for casting products that require high quality of glassiness. |
| General Information | |
|---|---|
| Features |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Barcol Hardness 1 | 35 | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 3870 | MPa | ASTM D790 |
| Flexural Strength | 84.3 | MPa | ASTM D790 |
| Additional Information |
|---|
| Transparent Accelerator, Co-oct (Co 6%): .5%Hardener, MEKPO (PO content, 55%): 1% |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (25°C) | 1.11 - 1.13 | g/cm³ | |
| Viscosity (25°C) | 0.30 - 0.50 | Pa·s | |
| Gel Time (25°C) | 2.5 - 5.0 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 50.0 | MPa | |
| Tensile Elongation at Break | 1.8 | % |
| Note Message | |
|---|---|
| 1 . | Barcol 934-1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3875H | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| RTP 399 X 96257 | RTP Company | PC | RTP |
| Huafon JF-P-9485 / JF-I-9422 | Huafon Group Co., Ltd. | PUR-Ester | Huafon |
| LUVOCOM® 1100-8401 | Lehmann & Voss & Co. | PESU | LUVOCOM® |
| Zytel® ST811HS NC010 | DuPont Performance Polymers | Nylon 6 | Zytel® |
