Order Products : sales@su-jiao.com
VYTEEN PC/ABS 8515XF
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | Lavergne Group |
| Trademark: | VYTEEN |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iUHwuC_VYTEEN-PC-ABS-8515XF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Vyteen PC/ABS 8515XF is an enhanced PC/ABS alloy with balanced impact/stiffness properties designed for injection molding applications Features
Typical Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (260°C/5.0 kg) | 18 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.50 - 0.70 | % | ASTM D955 |
| Transverse flow | 0.50 - 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 55.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 60 | % | ASTM D638 |
| Flexural Modulus 3 | 2500 | MPa | ASTM D790 |
| Flexural Strength 4 | 100 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 550 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 120 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 105 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 220 - 240 | °C | |
| Middle Temperature | 250 - 260 | °C | |
| Front Temperature | 260 - 270 | °C | |
| Nozzle Temperature | 275 - 280 | °C | |
| Processing (Melt) Temp | 265 - 275 | °C | |
| Mold Temperature | 60.0 - 90.0 | °C | |
| Injection Rate | Moderate-Fast | ||
| Screw Speed | 60 - 90 | rpm |
| Injection instructions |
|---|
| Injection Pressure: MediumBack Pressure: Medium |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200.5H | RTP Company | Nylon 66 | RTP |
| MAXAMID™ PA66HSL-NC010 | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
| RTP 2299 X 115070 F | RTP Company | PEEK | RTP |
| FRblend® PC-1301 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PC | FRblend® |
| LEXAN™ 920A resin | SABIC Innovative Plastics | PC | LEXAN™ |
