Order Products : sales@su-jiao.com
Ipethene® 900
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Carmel Olefins Ltd. |
| Trademark: | Ipethene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iU3bEL_Ipethene-900.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| IPETHENE ® 900 is a low density polyethylene injection molding grade, produced by high pressure autoclave technology. It is an extremely fast flowing grade for flexible articles where mechanical properties are not critical. It allows easy filling of the mold at short cycle time, even with complex geometry. The molded article is characterized by very low degree of build in stress, low warpage and good flexibility. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.916 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 50 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 42 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 8.00 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 130 | % | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 80.0 | °C | ISO 306 |
| Melting Temperature 1 | 105 | °C | ISO 11357-3 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 160 to 220 | °C | |
| Mold Temperature | 10.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | By DSC |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1007.3 | RTP Company | PBT | RTP |
| Telcar® TL-2363T XRD9 (PRELIMINARY DATA) | Teknor Apex Company | TPE | Telcar® |
| NEXUS Reprocessed PPC 12/1.5 RBK T20 | Nexus Resin Group, LLC. | PP Copolymer | NEXUS Reprocessed |
| Badamid® B70 M30 | Bada AG | Nylon 6 | Badamid® |
| FDM® Nylon 12 | Stratasys | Nylon 12 | FDM® |
