Order Products : sales@su-jiao.com
ACCUTECH™ CP0437C20L1
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | ACLO Compounders Inc. |
| Trademark: | ACCUTECH™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iT70M3_ACCUTECH-CP0437C20L1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ACCUTECH™CP0437C20L1 is a polypropylene copolymer (PP Copoly) product, which contains a 20% calcium carbonate filler. It is available in North America. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.10 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 55 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1000 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 15.0 | MPa | ASTM D638 |
| Fracture | 12.0 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 4.0 | % | ASTM D638 |
| Fracture | 60 | % | ASTM D638 |
| Flexural Modulus | 800 | MPa | ASTM D790 |
| Flexural Strength | 17.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 620 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 70.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 47.0 | °C | ASTM D648 |
| Additional Information |
|---|
| Ash Content, ASTM D2584: 20% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 799 A X 128004 D EG | RTP Company | LDPE | RTP |
| MIDILENA III HDPE5205B | ROMPETROL PETROCHEMICALS S.R.L. | HDPE | MIDILENA III |
| TEREZ PA/PP 7500 GF 7/1 | TER HELL PLASTIC GMBH | Nylon 6+PP | TEREZ PA/PP |
| Ultramid® 1403-2 NF3001 | BASF Corporation | Nylon 66 | Ultramid® |
| AA-Recoplast A3H1 | SmartLab Latvia SIA | PE, Unspecified | AA-Recoplast |
