Order Products : sales@su-jiao.com
ResMart Ultra HDPE 20
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | ResMart |
| Trademark: | ResMart Ultra |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iRnR5w_ResMart-Ultra-HDPE-20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Prime Copolymer High Density Polyethylene that provides a good balance of properties with excellent melt flow. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.951 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 20 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 26.9 | MPa | ASTM D638 |
| Flexural Modulus | 1280 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 32 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 76.1 | °C | ASTM D648 |
| Vicat Softening Temperature | 121 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rulon® W2 | Saint Gobain Performance Plastics | PTFE | Rulon® |
| Moplen EP442M | LyondellBasell Industries | PP Impact Copolymer | Moplen |
| VESTAMID® L L1833 | Evonik Industries AG | Nylon 12 | VESTAMID® L |
| CONATHANE庐 EN-16 | Cytec Industries Inc. | PUR, Unspecified | CONATHANE® |
| LNP™ THERMOCOMP™ UF0067W compound | SABIC Innovative Plastics | PPA | LNP™ THERMOCOMP™ |
