Order Products : sales@su-jiao.com
KMI PP KM-103FB
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | KMI Group, Inc. |
| Trademark: | KMI PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iLo4fo_KMIPPKM103FB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
KM-103FB is a propylene-ethylene block copolymer designed for film application. Well designed EP rubber & managing polymerization process to reduce contaminations gives KM-103FB an extremely low fish-eye level. Characteristics:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 78 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 28.4 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Flexural Modulus | 1370 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C) | 120 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Distortion | 108 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rainmaker Polypropylene MCCPGL20 | Rainmaker Polymers LLC | PP Copolymer | Rainmaker Polypropylene |
| MOTIS™ LV | Invibio Inc. | PEEK | MOTIS™ |
| VAMPALLOY 0023 V0 E | Vamp Tech | PC+ABS | VAMPALLOY |
| NEOPLAST 155 FT EB | Zylog Plastalloys | TPV | NEOPLAST |
| ALCUDIA® EBA PA-1240 | REPSOL | EBA | ALCUDIA® EBA |
