Order Products : sales@su-jiao.com
ASI POLYETHYLENE LP 552-01
| Category: | HDPE Copolymer , High Density Polyethylene Copolymer |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | ASI POLYETHYLENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iKS8fo_ASI-POLYETHYLENE-LP-552-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LP 552-01 is a U.L. approved narrow molecular weight copolymer high-density polyethylene combining good flow with excellent stiffness and cold temperature impact strength. It has good toughness and stress crack resistance. This resin meets FDA regulation CFR 177.1520 (c) 3.1. Applications include food storage containers, housewares, toys, overcaps, and closures. It also meets the requirement of Toyota Specification TSM 5518G-2. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.951 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | 1.00 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 22.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 100 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 827 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gardner Impact 1(-40°C) | 176 | J | ASTM D3056 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -73.3 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultramid® B33 L | BASF Corporation | Nylon 6 | Ultramid® |
| Nipoflex® 722 | TOSOH Corporation | EVA | Nipoflex® |
| Complet® LCF40-PEEK | PlastiComp, Inc. | PEEK | Complet® |
| Kingfa HR-527B | Kingfa | ABS | Kingfa |
| LINATHENE® LL115C | USI Corporation | LLDPE | LINATHENE® |
