Order Products : sales@su-jiao.com

SCLAIR® 19G

Category:	HDPE , High Density Polyethylene
Manufacturer:	NOVA Chemicals
Trademark:	SCLAIR®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	iIL0KU_SCLAIR-19G.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

SCLAIR®19G is a high density polyethylene material,. This product is available in North America and is processed by film extrusion or co-extrusion.

SCLAIR®The main features of 19G are:

High stiffness

Good processability

Homopolymer

accessible food

Stable

Typical application areas include:

packing

Movie

food contact applications

General Information
Additive	Processing stabilizer
Features	Low speed solidification crystal point Rigidity, high High density Homopolymer Workability, good Compliance of Food Exposure Barrier resin
Uses	Films Food packaging
Agency Ratings	FDA 21 CFR 177.1520(c) 2.2
Forms	Particle
Processing Method	Film extrusion Co-extrusion molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.960	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.2	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	69		ASTM D2240

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	38	µm
secant modulus			ASTM D882
1% secant, MD : 38 µm, blown film	840	MPa	ASTM D882
1% secant, TD : 38 µm, blown film	1270	MPa	ASTM D882
Tensile Strength			ASTM D882
MD : Yield, 38 µm, blown film	25.0	MPa	ASTM D882
TD : Yield, 38 µm, blown film	23.0	MPa	ASTM D882
MD : Broken, 38 µm, blown film	38.0	MPa	ASTM D882
TD : Broken, 38 µm, blown film	23.0	MPa	ASTM D882
Dart Drop Impact (38 µm, Blown Film)	29	g	ASTM D1709A
Elmendorf Tear Strength			ASTM D1922
MD : 38 µm, blown film	24	g	ASTM D1922
TD : 38 µm, blown film	450	g	ASTM D1922
Oxygen Transmission Rate (23°C, 0% RH, 38 µm, blown film)	1600	cm³/m²/24 hr	ASTM D3985
Water Vapor Transmission Rate (38°C, 100% RH, 38 µm, Blown Film)	2.8	g/m²/24 hr	ASTM F1249

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	129	°C	ASTM D1525

Optical	Nominal Value	Unit	Test Method
Gloss (45°, 38.0 µm, Blown Film)	14		ASTM D2457
Haze (38.0 µm, Blown Film)	41	%	ASTM D1003

Additional Information	Nominal Value	Unit	Test Method
Low Friction Puncture - Blown Film (38.0 µm)	190	J/cm	Internal method

Extrusion instructions
Blow-up Ratio: 2.5:1 to 4:1Die Gap: 1.3 to 2.5 mm

Resin Grade	Manufacturer	Category	Trademark
Ultramid® A3Z HP UV BK23220	BASF Corporation	Nylon 66	Ultramid®
APEX® RS 9011A	Teknor Apex Company	PVC, Rigid	APEX®
Huaxia Shenzhou PVDF DS202	Shandong Huaxia Shenzhou New Material Co., Ltd.	PVDF	Huaxia Shenzhou
LNP™ THERMOCOMP™ QF0069 compound	SABIC Innovative Plastics	Nylon 610	LNP™ THERMOCOMP™
Lupoy® SC2202	LG Chem Ltd.	PC	Lupoy®