Order Products : sales@su-jiao.com
PONYL 4006G30
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | POLYROCKS CHEMICAL CO., LTD |
| Trademark: | PONYL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iHWZHM_PONYL-4006G30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PONYL-4006G(+) are alkali-free environmental glass fiber reinforced PA6 material. They have the characteristics of wear resistance,heat resistance,oil resistance and chemical resistance;and also the characteristics of low equilibrium water absorption,small mould shrinkage,good dimensional stability and superior mechanism strength. 4006G(+) pass UL test and meet the requirements of RoHS, SVHC, PFOS&PFOA, 16P, Halogen-free and PAHs. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.36 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (235°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.10 to 0.80 | % | ASTM D955 |
| Water Absorption (Equilibrium) | 2.0 to 2.4 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 175 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 9.0 | % | ASTM D638 |
| Flexural Modulus | 8000 | MPa | ASTM D790 |
| Flexural Strength | 260 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 120 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 210 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Comparative Tracking Index | 575 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | HB | ||
| 3.00 mm | HB |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E General Purpose G-4275E | S&E Specialty Polymers, LLC | PVC, Unspecified | S&E General Purpose |
| Sindustris PBT GP2307FY | Sincerity Australia Pty Ltd. | PBT | Sindustris PBT |
| Nylene® 7115 HS | Custom Resins Group | Nylon 6 | Nylene® |
| AVP™ TLL40CP | SABIC Innovative Plastics | PC | AVP™ |
| Fortron® 1141L4 | Celanese Corporation | PPS | Fortron® |
