Order Products : sales@su-jiao.com

EMPILON® HC41

Category:	SEBS , Styrene Ethylene Butylene Styrene Block Copolymer
Manufacturer:	EMPILON
Trademark:	EMPILON®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	iGtuGz_EMPILON-HC41.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

EMPILON® HA series compound are specially designed for over-molding with engineering plastic such as ABS, PC, Nylon, PETG, PBT etc. which are commonly use in the 3C industry (Computer, Communication and Consumer electronics) as well as hand held device products for soft touch, anti-slip & vibration functional purposes. Hydrogenated Styrenic Block Copolymer is the main content of this HA series compound, its hardness range is from Shore A 52 to 77. They can be processed by Double injection and co-extrusion machines or ordinary plastic injection machines with an insert molding process.

EMPILON® HA-series compound are non-toxic and free of Pb, Cd, Hg, Cr6+, Sb, As, Ba, Se, halogen and DOP plasticizer, they also comply with the Restriction of the use of certain Hazardous Substance directive in electrical and electronic equipment (RoHS 2002/95/EC) and SONY SS-00259 4th that prohibit products that contain Pb, Cd, Hg, Cr6+, PBB and PBDE etc. They are 100% recyclable and comply with the Waste Electrical and Electronic Equipment directive (WEEE 2002/95/EC).

EMPILON® HA-series compound retain good mechanical properties after heating, weathering and solvent resistance testing and won't hydrolyze in water. They need 80°C ~ 90°C dehumidified hot air at least 2 hours before any molding process and need to be continually dried during operation. The HA series are Opaque or Transparent type in nature. For coloring, please select color master batch based on PE or EVA material with the exception of PVC. Higher screw speed and backpressure are necessary for better colorant dispersion.

General Information
Features	Block Copolymer Low (to no) lead content Calcium content, low (to none) Recyclable materials Hydrolysis resistance Non-toxic Halogen-free No antimony
Uses	overmolding Soft touch application
RoHS Compliance	RoHS compliance
Forms	Particle
Processing Method	Co-extrusion molding Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.910	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (150°C/2.16 kg)	6.0	g/10 min	ASTM D1238
Molding Shrinkage ¹
Flow	0.30	%
Transverse flow	0.50	%

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 10 sec)	31		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (300% Strain)	0.686	MPa	ASTM D412
Tensile Strength	7.65	MPa	ASTM D412
Tensile Elongation (Break)	780	%	ASTM D412
Compression Set (23°C, 70 hr)	45	%	ASTM D395

Thermal	Nominal Value	Unit
Brittleness Temperature	-50.0	°C

Optical	Nominal Value	Unit
Transmittance	87.0	%

Additional Information	Nominal Value	Unit
Adhesion to PC	2.0	kN/m

Injection	Nominal Value	Unit
Screw Speed	Slow
Drying Temperature	80.0 - 90.0	°C
Drying Time	2.0	hr
Rear Temperature	170 - 180	°C
Middle Temperature	175 - 190	°C
Front Temperature	185 - 200	°C
Nozzle Temperature	195 - 205	°C
Processing (Melt) Temp	185 - 205	°C
Mold Temperature	40.0 - 50.0	°C
Injection Pressure	2.94 - 3.92	MPa
Injection Rate	Slow
Back Pressure	0.490 - 0.686	MPa

Injection instructions
Hold Time: 5 sec.Cycle Time: 15~30 sec.

Note Message
1 .	Reference Only

Resin Grade	Manufacturer	Category	Trademark
Prixene® EL020E20S	POLYMAT	LLDPE	Prixene®
UNISOFT ADHESION™ AD-66A-NT-1-01	UNITED SOFT PLASTICS, Inc.	SEBS	UNISOFT ADHESION™
Bakelite® PF 6771	Hexion Inc.	Phenolic	Bakelite®
Dow ENDURANCE™ HFDB-0586 BK S	The Dow Chemical Company	TP, Unspecified	Dow ENDURANCE™
LubriOne™ LubriOne NY-30GF/15T/02S natur	PolyOne Corporation	Nylon 6	LubriOne™