Order Products : sales@su-jiao.com

3M™ Dyneon™ Fluoroplastic THV 415GZ

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ Fluoroplastic
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	iGmMrk_3M-Dyneon-Fluoroplastic-THV-415GZ.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Dyneon™ THV 415G Z Fluorothermoplastic is a flexible, transparent fluoroplastic composed of tetrafluoroethylene, hexafluoropropylene and vinylidene fluoride in the form of pellets or agglomerate. It provides a balance of low temperature processing, low flammability, thermal stability, and melt processability. It can be used to prepare extruded films, tubes, profiles, and wire coatings. Dyneon™ THV 415G Z Fluorothermoplastic is useful for applications that require flexibility, low temperature processing, and good chemical resistance. It has properties similar to THV 500 Z Fluorothermoplastic, but with a slightly lower melting point. The lower melting point provides more complete and uniform fusing of Dyneon™ THV 415G Z Fluorothermoplastic to itself and other substrates under autoclave temperature conditions used for elastomer curing.

Message

Dyneon™ THV 415G Z Fluorothermoplastic is a flexible, transparent fluoroplastic composed of tetrafluoroethylene, hexafluoropropylene and vinylidene fluoride in the form of pellets or agglomerate. It provides a balance of low temperature processing, low flammability, thermal stability, and melt processability. It can be used to prepare extruded films, tubes, profiles, and wire coatings. Dyneon™ THV 415G Z Fluorothermoplastic is useful for applications that require flexibility, low temperature processing, and good chemical resistance. It has properties similar to THV 500 Z Fluorothermoplastic, but with a slightly lower melting point. The lower melting point provides more complete and uniform fusing of Dyneon™ THV 415G Z Fluorothermoplastic to itself and other substrates under autoclave temperature conditions used for elastomer curing.

General Information
Features	Bondability Flame Retardant Good Chemical Resistance Good Flexibility Good Thermal Stability High Clarity
Uses	Coating Applications Film Profiles Tubing Wire & Cable Applications
Appearance	Clear/Transparent
Forms	Agglomerate Pellets
Processing Method	Film Extrusion Profile Extrusion Wire & Cable Extrusion

Physical	Nominal Value	Unit	Test Method
Density	1.97	g/cm³	ISO 12086
Melt Mass-Flow Rate (MFR)	15	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break)	28.0	MPa	ISO 527-1
Tensile Strain (Break)	500	%	ISO 527-1
Flexural Modulus	180	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	155	°C	ISO 12086

Flammability	Nominal Value	Unit	Test Method
Oxygen Index	> 65	%	ASTM D2863

Resin Grade	Manufacturer	Category	Trademark
RAMTAL PM1113	Polyram Ram-On Industries	Acetal (POM) Copolymer	RAMTAL
Resalloy™ 165	Resirene, S.A. de C.V.	Styrene Epoxy Copolymer	Resalloy™
TAROMID B 280 K6	Taro Plast S.p.A.	Nylon 6	TAROMID B
VINIKA® CD75FE	Mitsubishi Chemical Performance Polymers, Inc.	PVC, Flexible	VINIKA®
Laril 13 G/20	LATI S.p.A.	PPE+PS	Laril