Order Products : sales@su-jiao.com
Braskem PE SGF4950
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iG5Bf3_Braskem-PE-SGF4950.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SGF4950 is a high-density polyethylene copolymer, developed for the blow-molding segment. It shows well balanced properties between impact and stiffness, combined with high environmental stress cracking resistance and processability. The minimum biobased content of this grade is 96%, determined according to ASTM D6866. Application: Bottles for household cleaning products and health and care products; Bottles for food products; Caps & closures molded by compression; Rigid containers for cosmetics and pharmaceutical applications (complies with USP 33). |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.956 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.34 | g/10 min | |
| 190°C/21.6 kg | 28 | g/10 min | |
| Environmental Stress-Cracking Resistance 1 | ASTM D1693 | ||
| 50°C, 2.00 mm, 10% Igepal, Compression Molded, F50 | 40.0 | hr | |
| 50°C, 2.00 mm, 100% Igepal, Compression Molded, F50 | 70.0 | hr |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 30.0 | MPa | |
| Break, Compression Molded | 30.0 | MPa | |
| Flexural Modulus - 1% Secant (Compression Molded) | 1350 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 150 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 75.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 129 | °C | ASTM D1525 2 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Biobased Content | > 96 | % | ASTM D6866 |
| Note Message | |
|---|---|
| 1 . | 0.3 mm notched-plaques |
| 2 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Syncure™ V0044G S-1 RoHS Natural | PolyOne Corporation | XLPE | Syncure™ |
| Tarnoform® 500 LS | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| DECAL® 572R | Synres-Almoco BV | Phenolic | DECAL® |
| Edgetek™ AS-10GF/000 NATURAL | PolyOne Corporation | ABS | Edgetek™ |
| KOPA® KN333HSBL | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
