Order Products : sales@su-jiao.com
Gallonprene® GP200-8
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Shenzhen Sungallon Rubber & Plastic Corporation Limited |
| Trademark: | Gallonprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iFnUlg_Gallonprene-GP200-8.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Gallonprene®GP200-8 is a thermoplastic elastomer (TPE) product,. It can be processed by injection molding and is available in Africa and the Middle East, Latin America or Asia Pacific. Typical application areas are: consumer goods. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.858 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/1.0 kg) | 30 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 23°C) | 8 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | > 3.40 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | > 1200 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 170 - 190 | °C | |
| Middle Temperature | 180 - 200 | °C | |
| Front Temperature | 190 - 210 | °C | |
| Processing (Melt) Temp | 150 - 170 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Processing Temperature Limit: 260°CInjection Pressure: ModerateBack Pressure: 10 to 30% |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PBT TE5012M | Sincerity Australia Pty Ltd. | PC+PBT | Sindustris PBT |
| Novodur® H701 | Styrolution | ABS | Novodur® |
| INELEC PA66CF20 | Infinity LTL Engineered Compounds | Nylon 66 | INELEC |
| Jampilen HP501H | Jam Polypropylene Company | PP Homopolymer | Jampilen |
| MAJORIS CW337 - 7731 | AD majoris | PP Homopolymer | MAJORIS |
