Order Products : sales@su-jiao.com
K-vinyl KK-I-A88
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | Technovinyl Polymers India Ltd. |
| Trademark: | K-vinyl |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iDHG18_K-vinyl-KK-I-A88.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
K-vinyl KK-I-A88 is a Polyvinyl Chloride material. It is available in Africa & Middle East. Typical application of K-vinyl KK-I-A88: Wire & Cable |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.42 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | < 4.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 88 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 17.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 220 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Cold Impact | No cracks | ||
| Heat Shock | No cracks | ||
| Thermal Stability (200°C) | 2 | hr |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Insulation Resistance | 36.7 | Mohms/km |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ageing Test | ASTM S573 | ||
| in Hot Oven (E.B.) | 20.0 | ||
| in Hot Oven (T.S.) | 20.0 | ||
| Loss of Mass | 14.0 | g/m² | ASTM D573 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 5.5E+13 | ohms·cm | ASTM D257 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TPC PVC SM58E | Thai Plastics and Chemicals Public Company Limited | PVC Homopolymer | TPC PVC |
| KOPLA ABS KSG1020F | KOPLA Co., Ltd. | ABS | KOPLA ABS |
| LNP™ LUBRICOMP™ DFL16E compound | SABIC Innovative Plastics Asia Pacific | PC | LNP™ LUBRICOMP™ |
| Pebax® 5533 SA 01 MED | Arkema | PEBA-Ether | Pebax® |
| XYLEX™ X8409AC resin | SABIC Innovative Plastics | PC+Polyester | XYLEX™ |
