Order Products : sales@su-jiao.com
Asaprene™ T-413
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | AKelastomers |
| Trademark: | Asaprene™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iCWX6k_Asaprene-T-413.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Asaprene™ T-413 is a Styrene Butadiene Styrene Block Copolymer (SBS) material. It is available in Asia Pacific or Europe. Primary attribute of Asaprene™ T-413: Good Adhesion. Typical application of Asaprene™ T-413: Adhesives/Tapes |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 2.3 | g/10 min | |
| 200°C/5.0 kg | 14 | g/10 min | |
| Styrene/Butadiene | 30/70 | ||
| Viscosity - 25% Solution in Toluene | 700 | mPa·s |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 23°C, 2.00 mm, Compression Molded) | 81 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain, 23°C, 2.00 mm) | 1.90 | MPa | ISO 37 |
| Tensile Stress (Yield, 23°C, 2.00 mm) | 2.30 | MPa | ISO 37 |
| Tensile Elongation (Break, 23°C, 2.00 mm) | 690 | % | ISO 37 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Restramid PA 6.6 30GF | Polimarky Spolka Jawna | Nylon 66 | Restramid |
| Exelene® HDPE 4000 | Montachem International, Inc. | HDPE | Exelene® HDPE |
| Durethan® AM 40 X H2.0 DUS041 901510 | LANXESS GmbH | Nylon 66 | Durethan® |
| Grilamid® 2D 25 W 20 HL X black 9992 | EMS-GRIVORY | Nylon 6/12 | Grilamid® |
| DAI-EL™ G-751 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
