Order Products : sales@su-jiao.com
ENSOFT SU-141-20A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | ENPLAST, a Ravago Group Company |
| Trademark: | ENSOFT |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iBHFMw_ENSOFT-SU-141-20A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ENSOFT SU-141-20A is a thermoplastic elastomer (TPE) product,. It can be processed by injection molding and is available in North America or Europe. The main characteristics are: good UV resistance. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.10 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 20 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| 100% strain | 0.400 | MPa | ISO 37 |
| 300% strain | 1.00 | MPa | ISO 37 |
| Tensile Stress (Break) | 3.00 | MPa | ISO 37 |
| Tensile Elongation (Break) | 700 | % | ISO 37 |
| Compression Set | ASTM D395B | ||
| 23°C, 22 hr | 14 | % | ASTM D395B |
| 70°C, 22 hr | 47 | % | ASTM D395B |
| Additional Information |
|---|
| The value listed as Density, ISO 1183, was tested in accordance with ISO 2781.Tear Strength, ISO 34-2: 10 kN/mTensile Stress at Break, ISO 37: >3 MPaTensile Strain at Break, ISO 37: >700%Ozone Resistance, ISO 1431: No Crack |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 150 - 160 | °C | |
| Front Temperature | 170 - 180 | °C | |
| Nozzle Temperature | 185 - 190 | °C | |
| Processing (Melt) Temp | 190 - 200 | °C | |
| Mold Temperature | 10.0 - 50.0 | °C | |
| Screw L/D Ratio | 20.0:1.0 | ||
| Screw Compression Ratio | 2.5:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Versaflex™ OM 2262 | PolyOne Corporation | TPE | Versaflex™ |
| Ultramid® A3WG5 | BASF Corporation | Nylon 66 | Ultramid® |
| ALCUDIA® HDPE 5203 | REPSOL | HDPE | ALCUDIA® HDPE |
| Fluoroplex 1500 - GMF | UNIFLON | PTFE | Fluoroplex |
| ELASTOSIL® LR 6240 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
