Order Products : sales@su-jiao.com

KRATON® A1535 H

Category:	SEBS , Styrene Ethylene Butylene Styrene Block Copolymer
Manufacturer:	Kraton Polymers LLC
Trademark:	KRATON®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	i7UqYa_KRATON-A1535-H.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Kraton A1535 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 57%. It is supplied from North America in they physical form identified below: Kraton A1535 HU - supplied as an undusted powder Kraton A1535 HS - supplied as a dusted powder Kraton A1535 H is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the mid block suggests the use of this product in applications that must withstand weathering and high processing temperatures.

Message

Kraton A1535 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 57%. It is supplied from North America in they physical form identified below:

Kraton A1535 HU - supplied as an undusted powder

Kraton A1535 HS - supplied as a dusted powder

Kraton A1535 H is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the mid block suggests the use of this product in applications that must withstand weathering and high processing temperatures.

General Information
Additive	Antioxidant
Features	Copolymer Good Weather Resistance
Uses	Plastics Modification
Appearance	Clear/Transparent
Forms	Powder

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (230°C/5.0 kg)	< 1.0	g/10 min	ASTM D1238
Bound Styrene ¹	56.3 to 60.3	%	Internal Method
Antioxidant Additive	0.0 to 0.1	wt%	Internal Method
Total Extractables	< 1.6	%	Internal Method
Volatile Matter	< 1.0	%	Internal Method

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 10 sec)	83		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			Internal Method
--	27.6	MPa
300% Strain	7.93	MPa
Tensile Elongation (Break)	> 600	%	Internal Method

Note Message
1 .	Measured on the polymer before hydrogenation.

Resin Grade	Manufacturer	Category	Trademark
RapidCast™ RC-555	Innovative Polymers, Inc.	TSU	RapidCast™
TATREN® IM 25 75	Slovnaft Petrochemicals, s.r.o.	PP Impact Copolymer	TATREN®
TRISTAR® PC-08	Polymer Technology and Services, LLC	PC	TRISTAR®
Jam PE 52505	Jam Petrochemical Company	HDPE	Jam PE
Osterlene® PPC-100-1.1	Osterman & Company	PP Copolymer	Osterlene®