Order Products : sales@su-jiao.com
Ebalta GM 956 / GM 956-1
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Ebalta Kunststoff GmbH |
| Trademark: | Ebalta |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | i5sa44_Ebalta-GM-956-GM-956-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This product is a polyurethane system. By mixing of hardeners shore hardness between A 38 and A 83can be reached. The product can be subject to colour variations due to raw materials, but these colour variations have no influence on the quality and the properties of the product. Applications
Properties
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Shore Hardness (Shore A) | 80 to 86 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Yield) | 7.00 to 9.00 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 530 to 680 | % | ISO 37 |
| Tear Strength 3(1.00 mm) | 14 to 16 | kN/m | ISO 34-1 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 80 | ||
| Resin | Mix Ratio by Weight: 100 |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (20°C) | 1.38 to 1.42 | g/cm³ | |
| Viscosity (25°C) | 1.8 to 2.2 | Pa·s | |
| Curing Time (70°C) | 2.0 | hr | |
| Pot Life 4(20°C) | 15 to 20 | min |
| Note Message | |
|---|---|
| 1 . | Type 2 |
| 2 . | Type 2 |
| 3 . | Arch shaped test piece with incision |
| 4 . | 200 g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trademark PE LLB1918B | Trademark Plastics Corporation | LLDPE | Trademark PE |
| Fiberfil® J-60/10/E8 | Fiberfil® Engineered Plastics Inc. | PP Homopolymer | Fiberfil® |
| GLS Nylon 6 PW39 | GLS Polymers Pvt. Ltd. | Nylon 6 | GLS Nylon 6 |
| LNP™ LUBRICOMP™ QFL32 compound | SABIC Innovative Plastics | Nylon 610 | LNP™ LUBRICOMP™ |
| PENTAMID A E5 H natural | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
