Order Products : sales@su-jiao.com
InnoPlus LL9630A
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | PTT Global Chemical Public Company Limited |
| Trademark: | InnoPlus |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | i5FImo_InnoPlus-LL9630A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
InnoPlus LL9630A resin is a hexene co-polymer based linear low density polyethylene which is designed for rotational molding applications. This grade is non UV-stabilized pelletized rotational molding resin with high stiffness and an excellent balance of processability and environmental stress cracking resistance. Typical Applications: InnoPlus LL9630A can be used to produce variety applications such as general molding, toys & playground equipments, storage containers, medium to large water tanks and chemical tanks. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.939 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.2 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 1.90 mm, 100% Igepal, Compression Molded, F50) | > 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 20.0 | MPa | |
| Break, Compression Molded | 30.0 | MPa | |
| Tensile Elongation (Break, Compression Molded) | 1000 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 750 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 118 | °C | ASTM D1525 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Oven Temperature | 260 to 290 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| STARFLEX® P 7168 | STAR Thermoplastic Alloys & Rubbers, Inc. | TPE | STARFLEX® |
| ADDINYL B2 ZV30 | ADDIPLAST | Nylon 6 | ADDINYL |
| Cellophane™ 600MSC | Innovia Films Ltd. | Cellulose, Regenerated | Cellophane™ |
| GAPEX® HT RNP43MU04AL | Ferro Corporation | Nylon+PP | GAPEX® HT |
| Epolene® E-14E | Westlake Chemical Corporation | LDPE | Epolene® |
