Order Products : sales@su-jiao.com
HONES® PPS HS-R7-5
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | Guangdong Shunde Hones Polymer Material Co., Ltd. |
| Trademark: | HONES® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | i2WGzh_HONES-PPS-HS-R7-5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| High impact, Hydrolysis resistance |
| General Information | |
|---|---|
| Features |
|
| UL File Number |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.85 | g/cm³ | Internal Method |
| Molding Shrinkage | Internal Method | ||
| Flow : 2.00 mm | 0.20 | % | |
| Across Flow : 2.00 mm | 0.50 | % | |
| Water Absorption (23°C, 24 hr) | 0.010 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 120 | MPa | Internal Method |
| Tensile Elongation (Break) | 1.3 | % | Internal Method |
| Flexural Modulus | 11200 | MPa | Internal Method |
| Flexural Strength | 205 | MPa | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 255 | °C | Internal Method |
| CLTE | ISO 11359-2 | ||
| Flow | 4.5E-5 | cm/cm/°C | |
| Transverse | 5.0E-5 | cm/cm/°C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 8.0E+16 | ohms | IEC 60093 |
| Volume Resistivity | 4.0E+15 | ohms·cm | IEC 60093 |
| Electric Strength (3.00 mm) | 15 | kV/mm | IEC 60243-1 |
| Dielectric Constant | IEC 60250 | ||
| 1 kHz | 4.20 | ||
| 1 MHz | 4.20 | ||
| Dissipation Factor | IEC 60250 | ||
| 1 kHz | 1.0E-3 | ||
| 1 MHz | 2.0E-3 | ||
| Comparative Tracking Index | 120 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (310°C) | 240 | Pa·s | ISO 11443 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCARAB SB | BIP (Oldbury) Limited | Urea Formald | SCARAB |
| Starflam P10003 | Eurostar Engineering Plastics | Nylon 6 | Starflam |
| Naxel PC1210 | Custom Resins Group | PC | Naxel |
| Bergamid™ A70 ZKW | PolyOne Corporation | Nylon 66 | Bergamid™ |
| Plaslube® PA6/12 GF30 TS15 BK | Techmer Engineered Solutions | Nylon 6/12 | Plaslube® |
