Order Products : sales@su-jiao.com
FERREX® GPP30CS81HB NATURAL
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Ferro Corporation |
| Trademark: | FERREX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hw7zC3_FERREX-GPP30CS81HB-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FERREX® GPP30CS81HB NATURAL is a Polypropylene Copolymer (PP Copolymer) material filled with 31% calcium carbonate. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of FERREX® GPP30CS81HB NATURAL are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 1.3 | % | |
| Across Flow | 1.7 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 20.3 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 100 | % | ASTM D638 |
| Flexural Modulus | ASTM D790 | ||
| 1% Secant : 23°C | 1630 | MPa | |
| Tangent : 23°C | 1780 | MPa | |
| Flexural Strength (23°C) | 35.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 110 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | No Break | ASTM D4812 | |
| Gardner Impact (23°C) | 27.9 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 94.4 | °C | |
| 1.8 MPa, Unannealed | 54.4 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Scolefin 14 C 10-0 | Ravago Group | PP Homopolymer | Scolefin |
| Wondel® S GR0 | Nanjing Julong Engineering Plastics Co., LTD | ABS | Wondel® S |
| Wondel® P PR0 | Nanjing Julong Engineering Plastics Co., LTD | PP, Unspecified | Wondel® P |
| OP - PC/PEI 10GF | Oxford Polymers | PEI+PC | OP - PC/PEI |
| Plaskon NXG-1HS | Cookson Electronics - Semiconductor Products | Epoxy | Plaskon |
