Order Products : sales@su-jiao.com

KRATON® G1654 E

Category:	SEBS , Styrene Ethylene Butylene Styrene Block Copolymer
Manufacturer:	Kraton Polymers LLC
Trademark:	KRATON®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	hvfv76_KRATON-G1654-E.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Kraton G1654E polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 30% mass. It is supplied from Europe in the physical form shown below. Kraton G1654 ES - supplied as a "fluffy" crumb dusted with amorphous silica Kraton G1654 E is used as a base material for themoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G1654 E in applications that must withstand weathering and high processing temperatures.

Message

Kraton G1654E polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 30% mass. It is supplied from Europe in the physical form shown below.

Kraton G1654 ES - supplied as a "fluffy" crumb dusted with amorphous silica

Kraton G1654 E is used as a base material for themoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G1654 E in applications that must withstand weathering and high processing temperatures.

General Information
Additive	Antioxidant (300 ppm) 2
Features	Good Weather Resistance
Uses	Asphalt Modification Plastics Modification
Forms	Crumb

Physical	Nominal Value	Unit	Test Method
Density	0.918	g/cm³	ISO 2781
Antioxidant Additive	> 0.0300	wt%
Ash Content - ES	0.4 to 0.6	wt%	ISO 247
Polystyrene Content - KM 03	28.5 to 31.5	wt%
Total Extractables - KM 05	< 1.6	wt%
Viscosity - Solution ¹(25°C)	250 to 500	mPa·s

Additional Information	Nominal Value	Unit
Volatiles - KM 04	< 0.5	wt%

Note Message
1 .	KM 06, 10%w solution in toluene

Resin Grade	Manufacturer	Category	Trademark
Sindustris ABS TR411	Sincerity Australia Pty Ltd.	ABS	Sindustris ABS
Next Nylon 66 Prime Series PGHSLR33-01BK	Next Polymers Ltd.	Nylon 66	Next Nylon 66 Prime Series
Alathon® M6030	LyondellBasell Industries	HDPE, MMW	Alathon®
Hylon® N1040MHL	Ravago Manufacturing Americas, LLC	Nylon 66	Hylon®
Paxon™ AA60-003	ExxonMobil Chemical	HDPE, UHMW	Paxon™