Order Products : sales@su-jiao.com
Jackdaw PC DS10BL6648
| Category: | PC , Polycarbonate |
| Manufacturer: | Jackdaw Polymers |
| Trademark: | Jackdaw PC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | htS3TB_Jackdaw-PC-DS10BL6648.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jackdaw PC DS10BL6648 is a Polycarbonate (PC) product. It is available in Europe. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792, ISO 1183 |
| Water Absorption | |||
| 24 hr | 0.20 | % | ASTM D570 |
| 23°C, 24 hr | 0.20 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | |||
| Break | 65.0 | MPa | ISO 527-2 |
| -- | 65.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 95 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus | 2.20 | MPa | ASTM D790, ISO 178 |
| Flexural Strength | 90.0 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 90 | kJ/m² | ISO 179 |
| Charpy Notched Impact Strength | 90.0 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed | 140 | °C | ASTM D648, ISO 75-2/B |
| 1.8 MPa, Unannealed | 130 | °C | ASTM D648, ISO 75-2/A |
| CLTE - Flow | 6.5E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257, IEC 60093 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 | |
| Oxygen Index | 25 | % | ASTM D2863, ISO 4589-2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYshine PBT D221 GF30 | Polykemi AB | PBT | POLYshine |
| ALCOM® PC 740/4.12 UV GY1155-11LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| Andur 1-75 DP | Anderson Development Company | PUR-Ether/TDI | Andur |
| G-Lene I60U080 | Gas Authority of India Limited | HDPE | G-Lene |
| ULTEM™ 2400 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
