Order Products : sales@su-jiao.com
ESPOLEX 3885
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | Sumitomo Chemical America, Inc. |
| Trademark: | ESPOLEX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hsN7RK_ESPOLEX-3885.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ESPOLEX 3885 is a polyolefin thermoplastic elastomer (TPO (POE)) product,. It can be processed by injection molding and is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Typical application areas are: automotive industry. |
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.880 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.5 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ISO 868 | ||
| Shaw A | 85 | ISO 868 | |
| Shaw A, 10 seconds | 76 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 65.0 | MPa | ISO 178 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 3.50 | MPa | ISO 37 |
| Tensile Stress 2(Break) | 9.30 | MPa | ISO 37 |
| Tensile Elongation 3(Break) | 650 | % | ISO 37 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength 4 | ISO 179 | ||
| -30°C | No Break | ISO 179 | |
| 23°C | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature (Type A) | < -60.0 | °C | ISO 812 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 199 - 243 | °C | |
| Mold Temperature | 21.1 - 48.9 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.345 - 0.689 | MPa |
| Injection instructions |
|---|
| Injection Pressure: HighPack/Hold Pressure: 40-70% of Inj PressScrew RPM: SlowPart Draft: 3-6° per sideTool Surface Finish: Light Texture |
| Note Message | |
|---|---|
| 1 . | Type 1A, 500mm/min |
| 2 . | Type 1A, 500mm/min |
| 3 . | Type 1A, 500mm/min |
| 4 . | Thickness: 3.2 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Michital G1200 | API Polymers, Inc. | Acetal (POM) Copolymer | Michital |
| NEFTEKHIM PP 1452R (Z69S) | Nizhnekamskneftekhim Inc. | PP Homopolymer | NEFTEKHIM PP |
| Cheng Yu IPS620BK | Cheng Yu Plastic Company Limited | PS (HIPS) | Cheng Yu |
| Derakane® 411-350 | Ashland Performance Materials | Vinyl Ester | Derakane® |
| Geon™ Vinyl Rigid Molding M3800 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Molding |
