Order Products : sales@su-jiao.com
UBE Polyethylene J1019
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UBE Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hrozz3_UBE-Polyethylene-J1019.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| UBE Polyethylene J1019 is a Polyethylene material. It is available in North America for injection molding. Primary attribute of UBE Polyethylene J1019: Good Processability. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.917 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 10 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 47 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 12.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 450 | % | ASTM D638 |
| Apparent Bending Modulus | 130 | MPa | ASTM D747 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 87.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Matrixx 12N5006 | The Matrixx Group, Inc. | PP, Unspecified | Matrixx |
| Sindustris PBT GP2301R | Sincerity Australia Pty Ltd. | PBT | Sindustris PBT |
| SIBUR Synthetic Rubber NBR 3330 | SIBUR, LLC | NBR | SIBUR Synthetic Rubber |
| APEX® 3311-85NT | Teknor Apex Company | PVC, Flexible | APEX® |
| OXPEKK® IG300 | Oxford Performance Materials, Inc. | PEKK | OXPEKK® |
