Order Products : sales@su-jiao.com
Andur 850 AP
| Category: | PUR-Est/eth,TDI , Polyurethane (Polyester/Polyether mix, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hpC6ZQ_Andur-850-AP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 850-AP is the result of several years of research to develop a high performance moderate cost prepolymer for the cast urethane industry. This product is a polyester/polyether TDI terminated coprepolymer. An elastomer with a hardness of 84 to 86 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 4210 | cP | ASTM D2393 |
| 100°C | 920 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 4.1 to 4.5%Specific Gravity, ASTM D792, 77°F: 1.15 g/mlSpecific Gravity, ASTM D792, 212°F: 1.07 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PA/ABS Blend 2000 | TER HELL PLASTIC GMBH | Nylon 6+ABS | TEREZ PA/ABS |
| TRIBOCOMP® PBT TS7 | EPIC Polymers | PBT | TRIBOCOMP® |
| Nipol® NBR DN401 | Zeon Corporation | NBR | Nipol® NBR |
| Nypol® PA A3 BRC0001 NR360 MSP | Petropol Industry and Trade of Polymers LTDA | Nylon 66 | Nypol® PA |
| Chemlon® 230 GH | Teknor Apex Company (Chem Polymer) | Nylon 6 | Chemlon® |
