Order Products : sales@su-jiao.com
RTP 209 MS 1
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hn7L8L_RTP-209-MS-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.57 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| 3.18mm, injection molding | 0.30 | % | ASTM D955 |
| 6.35mm, injection molding | 0.40 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.50 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 16500 | MPa | ASTM D638 |
| Tensile Strength | 227 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 2.5 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 15200 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 331 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 130 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 1300 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, injection molded | 266 | °C | ASTM D648 |
| 1.8 MPa, unannealed, injection molded | 260 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Additional Information |
|---|
| The value listed as Flammibility, UL 94, was tested in accordance with RTP Company methods. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 274 - 293 | °C | |
| Middle Temperature | 274 - 293 | °C | |
| Front Temperature | 274 - 293 | °C | |
| Mold Temperature | 66.0 - 107 | °C | |
| Injection Pressure | 83.0 - 124 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAIRILAC ANC100 | Formosa Plastics Corporation | ABS | TAIRILAC |
| TABOREN PH 21 B 70 | SILON s.ro | PP Homopolymer | TABOREN |
| ADMER™ NF410E | Mitsui Chemicals Europe GmbH | LLDPE | ADMER™ |
| OP - PBT OPX782 | Oxford Polymers | PBT | OP - PBT |
| Plaslube® POM CO GF10 TL10 BK | Techmer Engineered Solutions | Acetal (POM) Copolymer | Plaslube® |
