Order Products : sales@su-jiao.com
AvaSpire® AV-621 GF30
| Category: | PAEK , Polyaryletherketone |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | AvaSpire® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hfu4Cc_AvaSpire-AV-621-GF30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
AvaSpire AV-621 GF30 is a AvaSpire AV-621 30% glass fiber reinforced brand. The formula has better dimensional stability and lower warpage than 30% glass fiber reinforced PEEK. The resin maintains most of the useful ultra-high performance of glass fiber reinforced PEEK, including chemical resistance, fatigue resistance and long-term thermal oxidation stability, but the thermal deformation temperature is lower than that of 30% carbon fiber reinforced PEEK. The excellent balance between various properties of the material makes it very suitable for various industries with demanding requirements including medical care, transportation, electronics, oil and gas, chemical treatment, etc. -Beige: AV-621 GF30 BG 20 -Black: AV-621 GF30 BK95 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.55 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (400°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage 1 | ASTM D955 | ||
| Flow : 3.18mm | 0.10 - 0.30 | % | ASTM D955 |
| Transverse flow : 3.18mm | 0.90 - 1.1 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.20 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 101 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 2 | 9900 | MPa | ASTM D638 |
| -- | 10600 | MPa | ISO 527-2/1A/1 |
| Tensile Stress | |||
| Yield | 158 | MPa | ISO 527-2/1A/5 |
| -- 3 | 147 | MPa | ASTM D638 |
| Tensile Elongation | |||
| Fracture 4 | 3.2 | % | ASTM D638 |
| Fracture | 3.2 | % | ISO 527-2/1A/5 |
| Flexural Modulus | |||
| -- | 9400 | MPa | ASTM D790 |
| -- | 9800 | MPa | ISO 178 |
| Flexural Strength | |||
| -- | 237 | MPa | ASTM D790 |
| -- | 236 | MPa | ISO 178 |
| Compressive Strength | 159 | MPa | ASTM D695 |
| Shear Strength | 84.5 | MPa | ASTM D732 |
| Poisson's Ratio | 0.43 | ASTM E132 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| -- | 120 | J/m | ASTM D256 |
| -- | 14 | kJ/m² | ISO 180 |
| Unnotched Izod Impact | |||
| -- | 1000 | J/m | ASTM D4812 |
| -- | 70 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Annealed) | 217 | °C | ASTM D648 |
| Glass Transition Temperature | 158 | °C | ASTM D3418 |
| Peak Melting Temperature | 340 | °C | ASTM D3418 |
| CLTE - Flow (-50 to 50°C) | 1.7E-5 | cm/cm/°C | ASTM E831 |
| Specific Heat | DSC | ||
| 50°C | 1290 | J/kg/°C | DSC |
| 200°C | 1660 | J/kg/°C | DSC |
| Thermal Conductivity | 0.28 | W/m/K | ASTM E1530 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.9E+17 | ohms | ASTM D257 |
| Volume Resistivity | 2.1E+17 | ohms·cm | ASTM D257 |
| Dielectric Strength (3.00 mm) | 15 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 60 Hz | 3.52 | ASTM D150 | |
| 1 kHz | 3.53 | ASTM D150 | |
| 1 MHz | 3.48 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 60 Hz | 1.0E-3 | ASTM D150 | |
| 1 kHz | 1.0E-3 | ASTM D150 | |
| 1 MHz | 5.0E-3 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.800 mm | V-1 | UL 94 | |
| 1.60 mm | V-0 | UL 94 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (400°C, 1000 sec^-1) | 650 | Pa·s | ASTM D3835 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 149 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 366 | °C | |
| Middle Temperature | 371 | °C | |
| Front Temperature | 377 | °C | |
| Nozzle Temperature | 382 | °C | |
| Processing (Melt) Temp | 366 - 388 | °C | |
| Mold Temperature | 149 - 177 | °C | |
| Injection Rate | Fast | ||
| Screw Compression Ratio | 2.0 : 1.0 - 3.0 : 1.0 |
| Injection instructions |
|---|
| 保压压力：最低值 |
| Note Message | |
|---|---|
| 1 . | 5" x 0.5" x 0.125" bars |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | 5.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® F02-141J | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| SABIC® Vestolen A 4062R y | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® Vestolen A |
| Hanwha Total PP FH44 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, Unspecified | Hanwha Total PP |
| POLYfill PPH FR15030 XNH | Polykemi AB | PP Homopolymer | POLYfill |
| Marlex® HMN TR-935G | Chevron Phillips Chemical Company LLC | MDPE | Marlex® |
